filename: tfs 1176a.doc version 2.1 03.12.2009 vectron international filter specification tfs 1176a 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout measurement condition ambient temperature: 23 c input pow er level: 0 dbm terminating impedance: input: 50 ohm output: 50 ohm ch aracteristics remark: the max i mum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fix ed at 1176,45 mhz w i thout any tolerance or limit. the v a lues of absolute attenuation a abs are guaranteed for the w hole operating temperature range. the frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. d a t a ty p. v a lue tolerance / limit insertion loss a e 3 , 2 d b m a x . 4 , 2 d b nominal frequency f n - 1176,45 mhz passband p b - f n 8,0 mhz pass band v a riation 1 , 0 d b m a x . 2 , 0 d b a b solute attenuation a abs 1 m h z . . . 1 1 0 0 m h z 4 6 m i n . 4 0 d b 1 1 0 0 m h z . . . 1 1 4 7 m h z 3 5 m i n . 2 8 d b 1 1 9 6 , 9 1 m h z . . . 1 2 6 0 m h z 3 8 m i n . 2 8 d b 1 2 6 0 m h z . . . 1 5 0 0 m h z 4 1 m i n . 4 0 d b group delay at f n 3 7 n s m a x . 5 0 n s group delay ripple w i thin pb 3 0 n s m a x . 4 0 n s vswr w i thin pb 1,9 : 1 max. 2,3 : 1 input pow er lev e l - m a x . 1 5 d b m operating temperature range otr - + 10 c ... + 35 c storage temperature range - - 40 c ... + 85 c temperature coefficient of frequency tc f ** -36 ppm/k - **) ? f(h z ) = tc f (ppm/k) x (t-t 0 ) x f to (mhz) ge ne ra te d: ch ecked / a p p r o v ed : notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1176a.doc version 2.1 03.12.2009 vectron international filter specification tfs 1176a 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout f ilter ch aracteristic 200 400 600 800 1000 1200 1400 -6 0 -5 0 -4 0 -3 0 -2 0 -1 0 0 | s 21| , m a t c hed, i l = - 2 . 19 db , f r equenc y i n m h z |s 2 1 | i n db 112 0 11 40 116 0 1 180 120 0 1 220 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 | s 21|, m a t c h ed, i l = - 2 . 1 9 db , f r equ enc y i n m h z |s 2 1 | i n d b cons truc tion a nd pin c onne c t ion (all dimensions in mm) 1 2 3 5 6 7 4 8 1, 2 m a x . 0,6 3, 0 + / - 0 , 1 5 0,6 1, 5 0,6 6 0 g r d . 13 7 5 d a te c o d e date code: y ear + w eek x 2009 a 2010 b 2011 ... 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground b76a x28 50 ? t est circu i t 2 6 l 1 sa w l 2 1,3,4,5,7,8 notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1176a.doc version 2.1 03.12.2009 vectron international filter specification tfs 1176a 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u l l o ff di r e c t io n pi n m a r k e r ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 a o : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 8,4 + 1 ,5/-0 w 2 (max ) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2 the minimum bending radius is 45 mm. notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1176a.doc version 2.1 03.12.2009 vectron international filter specification tfs 1176a 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1176a.doc version 2.1 03.12.2009 vectron international filter specification tfs 1176a 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout history version reason of changes name date 1.0 - generation of development s pecification alaw neh 06.09.2006 1.1 - change absolute attenuation strehl 15.09.2006 2.0 - change data table - added ty pical values - generation of filter specification noack 26.07.2009 2.1 - change test circuit - update header and footer noack 03.12.2009 notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
|